Double Convoluted Pneumatic Punch Air Cushion F-100-2 Comparable To Yokohama S-100-2R Air Spring
Comparable To
AIRSUSTECH Part No.: F-100-2
YOKOHAMA S-100-2R air spring
YOKOHAMA S 100 2R air cushion
YOKOHAMA S-100-2 air suspension spring
YOKOHAMA S 100 2 air bellow
YOKOHAMA S100-2 air shock
YOKOHAMA S 100 2 shock absorber
YOKOHAMA S100-2R air balloon
Replaces these Japan punch press air springs
Specifications and Detailed Technical Parameters
F-100-2 air springs is self seal. It has double convolutions, with one pieces of ring, without plate
| Guomat No. | Yokohama No. | Height | Maximum stroke(mm) | Max diameter(mm) |
| Design Height(mm) | Max. Heigh(mm)t | Min Height(mm) |
| F-100-2 | S-100-2R | 98 | 143 | 58 | ±30 | 160 |
| Guomat No. | Yokohama No. | Standard Height,Internal Pressure 0.49 Mpa | | |
| Effective Area (cm2) | Volume(L) | Load (KN) | Dynamic Spring Parameters (N/mm) | Natural Frequency (Hz) | Max inner pressure limited (Mpa) | Burst inner pressure (Mpa) |
| F-100-2 | S-100-2R | 79 | 0.85 | 3.9 | 118 | 2.7 | 0.88 | 2.9-3.9 |
F-100-2 double convoluted air cushion for pneumatic punch
Air cushions, also known as stretch cushions, are often used when pressing large parts or deep drawn parts on large pneumatic punches.
Pneumatic punch airbags are commonly used AIRSUSTECH airbags which are comparable to Yokohama airbags in Japan.
The air cushion foot is composed of a plane, an air cushion body, a concave part, a guard edge, a bump, a pressure ring, an air chamber and an air valve. The air cushion body and the bump are formed with wear-resistant soft plastic material at one time, which plays a good supporting role. After the air cushion of the pneumatic punch press is inflated, the multi-point contact of the bumps instead of the traditional shock-proof foot surface contact form ensures that the contact with the punch foundation is more firm and stable. The high-speed press air-cushion foot fixing ring makes the plane of the air-cushion body in close contact with the punch base to ensure that the middle extension of the air-cushion foot is recessed to form a tight air chamber, so that the cushioning and shock-proof effect is optimal.
In addition to being used to prevent wrinkling during stretching, the additional air cushion of the pneumatic punch can also be used as a top material or for partial forming of the bottom of the workpiece. After the punch is equipped with a stretching pad, the scope of use of the punch can be expanded and the air cushion system can be adjusted. The pressure of the compressed air can obtain the pressing force suitable for various stamping work, and the punching air cushion can also play the role of environmental protection and mute.
The related picture of F-100-2
Product Tags:
|
|
S-100-2R Yokohama Air Spring Two Convoluted Pneumatic Punch Air Cushion Images
|
